Epoxies – Sealers & Supplies
Welcome to Decorative Concrete & Supply’s guide to Epoxies, Sealers, and Supplies. Our expert range of products ensures that your concrete surfaces look immaculate and last a lifetime.
Concrete coatings
Tru-Strip Coating Stripper and Remover
Tru-Strip Coating Stripper and Remover
Tru Strip is a roll-on sealer remover that is biodegradable, very user-friendly, easy to use. It is highly effective in removing most standard sealers from surfaces like metal, wood, masonry, brick and especially concrete. Tru Strip provides superior stripping capabilities to lift urethanes, alkyd paints, latex paints, lead based paints and varnish, from all types of substrates. Because Tru Strip emulsifies the material, once broken down, the coatings cannot re-cure.
- Bio-friendly, industrial strength coating stripper
- Safely breaks down most existing coatings including acrylics, urethanes, glues, and some epoxies
- Spray or roll on, wait a few hours, and wipe or wash away
- Safe on most any surface
- Also available in 1-gallon container
- Much more effective than a consumer-strength product from a big box store
- Coverage ranges from 100 to 250 sq ft/gallon (depending on coating thickness)
- No chlorinated solvents
- You should follow the instructions for Tru Strip on a test section before trying the entire surface.
- Water cleanup
Polyaspartic 85 – Polyaspartic Coating
Polyaspartic 85 – Polyaspartic Coating
The new zero VOC formula is designed to be easier to use for installers. This high solids coating has an extended cure time and still allows a quicker return to service than epoxy and urethane. Polyspartic 85 is a great all-purpose final coat on many projects including garages, basements, commercial flooring and concrete countertops.
- Pot life of 45 minutes
- Simple-to-use, two-part sealer provides a durable, long-lasting, high-gloss finish
- Exhibits the best of abrasion, chemical, and heat resistance compared to other decorative coatings and sealers
- Penetrates and beautifully enhances decorative color designs
- Sold by 3 part kit (2 parts A and 1 B)
- Coverage ranges from 200-400 sq ft per gallon depending on coating application
- Serves as excellent high-gloss, ultra-durable finish for decorative floors and concrete countertops
TI Epoxy HP
TI Epoxy HP
When your concrete is poured, an epoxy concrete sealer/coating can ensure the final product matches your aesthetic and lasts for years to come.
Walttools Epoxy HP (epoxy floor coating) is a highly durable, two-part, decorative epoxy coating designed for stained concrete floors, countertops and other decorative concrete surfaces where a hard-wearing surface is a must. The epoxy floor coating formulation provides much better leveling properties than others on the market giving that glass-like finish. Epoxy HP has one of the longest working times as well. Use alone or with the Essential Primer as the base coat with more moisture-prone surfaces. This two-part system is simple to apply, and it provides excellent protection and enhancement to decorative surfaces. Excellent for using chips, quartz, and metallic floors.
- Cycloaliphatic formulation for highest performance
- Excellent chemical resistance
- Enhances surface colors
- Long working time
- Durable finish
- Non-yellowing indoors
- ZERO V.O.C formula
- Coverage of 50-75 sq ft per kit (based on porosity and surface profile)
WBU M
WBU M
Walttools WBU-M is a water-based, two-component, chemical resistant, self-cross-linking polyurethane coating. The subtle matte finish offers excellent abrasion, chemical, and stain resistance, along with superior color retention. It is ideal for concrete floors and walls in garages, restaurants, warehouses, storage facilities, aircraft hangars, animal clinics, and vehicle service centers where you are looking for a non-intrusive look that hides long-term wear. WBU can be pigmented. This is often used as a hardy topcoat for coatings such as Walttools Epoxy HP. Walttools WBU can be used equally well on vertical or horizontal surfaces. This will provide a surface that is very natural and almost unchanged when sealed.
- UV-resistant
- Superb abrasion, chemical, and stain resistance
- Suitable for both exterior and interior surfaces
- Apply by spray, roll, or microfiber applicator
- VOC-compliant and low-odor
- Excellent elasticity and elongation properties
- Early water resistance
- Also available in high-gloss
- 32% solids
- 4:1 mix ratio (4 part A: 1 part B)
- 5 Gal kit
- Coverage approx. 350 sq ft per gallon
Containers with the kit may not always be full and are often designed to be the mixing container for your project. Professional use only.
WBU G
WBU G
Walttools WBU-G is a water-based, two-component, chemical resistant, self-cross-linking polyurethane coating. The high-gloss finish offers excellent abrasion, chemical, and stain resistance, along with superior color retention. It is ideal for concrete floors and walls in garages, restaurants, warehouses, storage facilities, aircraft hangars, animal clinics, and vehicle service centers. WBU can be pigmented. This is often used as a hardy topcoat for coatings like Walttools Epoxy HP. Walttools WBU works well on both vertical or horizontal surfaces.
- UV-resistant
- Superb abrasion, chemical, and stain resistance
- Suitable for both exterior and interior surfaces
- Apply by spray, roll, or microfiber applicator
- VOC compliant and low odor
- Excellent elasticity and elongation properties
- Early water resistance
- Also available in low gloss
- 2:1 mix ratio (2 part A: 1 part B)
- 3 Gal kit
- Coverage approx. 350 sq ft per gallon
Containers in this kit may not be completely full and can often be used as the mixing container for your project. Professional use only.
Acri-Thane
Acri-Thane
Acri-Thane Acrylic Urethane coating is a highly durable decorative sealer designed for stained concrete floors, countertops, and other decorative concrete surfaces. This 2-part system (1:1) is simple to apply and provides excellent protection and enhancement to decorative surfaces. It displays new polyurethane technology which provides RPD-rapid property development – making this a great choice over other polyurethane systems due to the very fast turnaround. It is also self-priming which means it does very well as the main sealer or a highly durable topcoat over epoxies. THIS IS BEST USED AS A SINGLE COAT APPLICATION. YOU MUST SAND BETWEEN COATS.
- Improved chemical resistance
- Long pot life
- Apply with brush, roller, or squeegee
- Durable finish
- 2-gallon kit
- Indoors and outdoors
- ZERO V.O.C formula
- Coverage of 200-350 sq ft per gallon (based on porosity and surface profile)
- Coverage will vary from surface to surface
Ultra Thane 1000
Ultra Thane 1000
Ultra Thane 1000 is a single-component, water-based, aliphatic urethane made for both indoor and outdoor use on concrete, overlayment, and micro toppings. Ultra Thane 1000 is low VOC and designed to be used alone or as a finish coat over epoxy or similar coatings for increased wearability. It displays excellent resistance to water, alkali, acids, UV Light, and stains. This product will darken the surface slightly with a medium gloss. Ultra Thane 1000 is the premier thin (2 mil) coating for ease and durability. Its quick-dry time allows for fast recoating and returns to use. The high performance of this clear coat provides the durability of a solvent-based system with the ease and safety of a low VOC (under 100g/L) water-based system. Unlike most polyurethanes (that aren’t moisture tolerant), Ultra Thane 1000 has effective properties related to vapor permeability that allows it to be used outdoors.
For interior coatings, this may be one of the easiest, user-friendly sealers on the market. The low VOC rating makes it usable in nearly all states in the United States. Professional installers can generate LEED points. For the DIYer, the low odor level and easy, roll-on application make it an easy choice. It is the best interior concrete sealer available these days.
Ultra Thane 1000 will make a good coating on vertical surfaces because of its properties against graffiti.
At full cure, this is a hard- and long-wearing surface.
TYPICAL USES: Basements, warehouses, foyers, kennels, restaurant floors, stores, concrete countertops, brick hearths, some tile, or almost any surface that needs an abrasion-resistant. low-mil coating.
- 1-gallon coverage is approximately 250 sq ft/gallon
- Can even be tinted for a one step finish such as for a garage or workshop floor
- Best results come from two or three light applications
- Water cleanup
- Dries in an hour or so; usable cure in 24-48 hrs, full cure in 7 days
Essential Primer Epoxy
Essential Primer Epoxy
Walttools Essential Epoxy is a 100 percent epoxy system used as a base coat before decorative coatings such as Epoxy, Aliphatic Urethane, and Polyaspartic. It is designed with excellent leveling properties to provide a tenacious bond to both the substrate and the topcoat lessening the chance of bond failures common with such coatings. It will withstand moisture vapor issues that other coatings will not do alone.
- Provides at least 24 hr window for secondary coating
- Cycloaliphatic formulation for highest performance
- Excellent bonding properties
- Enhanced flexural strength
- Long pot life
- Non-yellowing indoors
- ZERO V.O.C formula
- Coverage of about 75-100 sq ft per gallon (based on porosity and surface profile.
AU 85 Aliphatic Urethane
AU 85 Aliphatic Urethane
AU 85 is a commercial grade, solvent-based, high gloss aliphatic urethane coating designed to enhance and protect a variety of surfaces from deterioration, oil and gas stains, harsh liquids and chemicals. AU 85 polyurethane produces protective films that are durable, flexible, and impact-resistant. This product is an excellent choice for high-wear areas in need of high abrasion and scratch resistance as well as chemical resistance. It is manufactured in the U.S. and made from the latest resin technology. It is a low odor, zero VOC product. AU 85 will provide a long-lasting, high gloss finish that won’t peel, chip, or flake. The UV stable formula will resist fade and gloss deterioration due to sunlight. A true industrial coating. It can be applied directly to properly prepared concrete.
- Simple-to-use, two-part sealer provides a durable, long-lasting, high-gloss finish
- Exhibits the best overall durability over other decorative coatings and sealers
- Beautifully enhances decorative color designs
- Coverage ranges from 275-350 sq ft per gallon depending on coating application
- Serves as excellent high-gloss, ultra-durable finish for concrete countertops
TI Epoxy 1040 (2 GAL Kit)
TI Epoxy 1040 (2 GAL Kit)
- Easy-to-use, water-based epoxy system for floors and countertops
- This 2 part (1:1) epoxy may be used as a medium gloss finish or as a primer coat for any number of other desired coatings such as PAP systems and urethanes
- Excellent chemical resistance
- Long pot life
- Very forgiving to apply
- Durable finish
- Low odor
- 2-gallon kit
- Coverage will vary from surface to surface
Concrete Color Products
Tru Tique Antique Color Wash
Tru Tique Antique Color Wash
Walttools Tru Tique is a water-based, antiquing, color wash solution designed to provide the natural, two-toned mottled effect that’s normally obtained by the use of colored release agents. Tru Tique is perfect for coloring new surfaces and rejuvenating existing textured surfaces that have faded over time.
- Same color effects as powder release agent without the mess
- Same color pallet as current release agents for consistent results
- 1,500-3,000 square feet per bucket based on blend strength
- Very easy to apply
Colors are: Adobe Brown, Champaign, Charcoal grey, Coffee brown, copper earth, Dark Walnut, Desert dust, Emerald Green, Graphite, Green Slate, Light Gray_Natural, Mauve, Medium Brown, Medium Gray, Mesa Buff, Pecan Brown, Red Brick, Sandstone, Terra Cotta, Blue
COLOR
Integral Color Concrete Pigment
Integral Color Concrete Pigment
Transform concrete into stunning designs with Walttools Integral Color Pigment.
Achieve consistent, vibrant color for any project with a concrete pigment that’s built to last:
- Durable and Fade-Resistant: Keeps your concrete looking fresh for years.
- Easy to Mix: Seamlessly integrates into any concrete batch for hassle-free application.
- Versatile: Perfect for patios, driveways, floors, and decorative concrete projects.
Colors are Rose, Sunset Rose, Khaki, Desert, Straw, Pewter, Mesa, Sage, Limestone, Moss,. Sandalwood, Mocha, Mohave Sun, Walnut, Canyon Rust, Wheat, Dove, Char green, Terra Cotta, Blustone, Cahaba, Greystone, Brownstone, Brick, Bronze, Dark Brownstone, Dark Wheat, Cocoa, Charcoal, Old Brick, Red Mountain, Black
COLOR
Tru Tint Concrete
Dye
Tru Tint Concrete Dye
- For use on most concrete surfaces without necessary sanding or grinding.
- The water-based concrete dye formula penetrates efficiently and safely within minutes.
- Concrete dyes can be diluted to taste and/or combined for a multitude of finishes.
- Concrete dye color samples shown provide a guide, but all concrete is individual and final results depend on a variety of factors.
- Sold as concentrated 16 oz. unit – Dilutes to 1 gallon of dye.
Colors are: Black, Blaze, Blush, Caribbean, Chocolate, Dandelion, Forrest, Harvest, Midnight, Olive, Pasture, Redwood, Saddle, Sunfire, Teal, Texas Clay
COLOR
Tru Tint | Acid Concrete Stain
Tru Tint | Acid Concrete Stain
Tru Tint Concrete Acid Concrete Stains produce the most natural, realistic, “mother-nature-mimicking” tones possible.
- Staining occurs via chemical reaction, thus much more permanent than surface coloring.
- Enhances surface imperfections producing unique and appealing results on otherwise plain concrete.
- Stains can be diluted and/or combined for a multitude of finishes.
- Color samples only provide a guide as all concrete is individual and final results depend on a variety of factors.
- Blues and greens are highly recommended for indoor use only due to the tendency to darken from long-term exposure to moisture.
- Sold per gallon. Quarts and samples are available for purchase by request.
- 1-gallon coverage approx. 250 sq ft.
Colors are: Amber, Bronze, Cancun, Carmel, Desert, Ebony, Evergreen, Garnet, Green Apple, Lavender, Marigold, Mohave, Olive, Redwood, Rustic, Sandalwood, Slate, Teal, Turquoise, Walnut
COLOR
Tru Tint WB | Water-Based Concrete Stain
Tru Tint WB | Water-Based Concrete Stain
Penetrating water-based concrete stain for use on nearly any concrete surface.
- Fast-drying water-based concrete stain
- Semi-translucent, easy to layer to achieve a mottled look
- Can be sprayed, rolled, brushed, or sponged
- Easy to dilute for a lighter coating
- UV stable for indoor and outdoor use
- 1-gallon coverage is approx. 250 sq ft
- Available in regular or concentrated forms (Sold in regular, ready-to-use form. Call if you would prefer the concentrated form.)
- Should be sealed to fully lock in color
Colors are: Autumn, Aztek, Bay Leaf, Billiard, Black, Blue Steel, Bluejay, Bluestone, Boulder, Buckskin, Cancun, Cappacino, Champaign, Copper, Coronado, Dark Walnut, Dove, Dusty Rose, Emerald, Espresso, Evergreen, Fawn, Hazelnut, Indigo, Jade, Mauve, Mocha, October Sky, Old Plank, Olive, Red, Rust, September Wheat, Sequoia, Sky, Spruce, Storm, Tobacco, Whey, Whitewash
COLOR
Re-Ax | Reactive Concrete Stain
Re-Ax | Reactive Concrete Stain
Tru Impressions Re-Ax concrete stain is a revolutionary product that produces better-than-acid-stain mottling with none of the hassles associated with acid-based stains.
- Size: quarts or gallons
- Easy to apply, just spray and wait
- Can be used with other colors for unique looks
- Can be used in conjunction with other stain systems
- No neutralizing needed
- Several natural colors
- Black Walnut and Mossy Brown require an activator(included)
Colors are: Antique Teal, Black Walnut, Chesnut, Creme, Fawn, Golden Wheat, Mossy Brown, Olive, Redwood, Sage, Varied Slate, Vintage Brown
NOTE: Varied slate is “varied”. Results can be light tan, blue, green, or grey. Grey is usually only when white concrete are used.
COLOR
TI Dust-On Color
Hardener
TI Dust-On Color Hardener
- Ready-to-use, dust-on color hardener for freshly poured concrete
- Can be blended to give a mottled effect
- Easy to apply for interior and exterior
- Long-lasting & UV resistant
- Typically used for stamped flatwork applications
- 60 lb bag
- Also great for trowelling color into vertical mixes such as Tru Pac X
Colors are: Adobe Brown, Brick Red, Champaign, Charcoal Gray, Dark Walnut, Emerald Green, Green Slate, Mauve, Medium Gray, Mesa Buff, Outback, Sandstone, Terra Cotta, Blue
COLOR
CONCRETE SEALERS AND COATINGS (SOLVENT-BASED SEALERS)
Stampsheen® 350 High-Gloss Decorative Concrete Sealer
Stampsheen® 350 High-Gloss Decorative Concrete Sealer
Finally, a low VOC decorative concrete sealer that isn’t problematic. This proprietary formulation greatly reduces the problems associated with today’s restricted sealers, such as blistering, premature whiting, and outright peeling. The use of high quality domestic resin ensures excellent wear- and weather resistance, which means a much longer service time between re-seal needs. Walttools has made a gem of a sealer here and is confident you will make this a go-to decorative acrylic sealer.
- Ultimate high-gloss cure and seal (especially if you’re located in one of the many states requiring sealers under 400 VOC levels)
- High-quality finish as great as our regular sealer
- 25% solids
- Solvent-based, pure acrylic resin
- Non-yellowing, UV-resistant, anti-spall, and wear-resistant
- Coverage: approx. 200 sq ft/gallon
- Also available in 1-gallon containers
Stampsheen® High-Gloss Decorative Concrete Sealer
Stampsheen® High-Gloss Decorative Concrete Sealer
This product has been brought back by popular demand and is better than ever! It’s an improved formula with a higher-quality resin for better finish and durability qualities.
- Ultimate high-gloss cure and sealer
- 25% solids, solvent-based, pure acrylic resin
- Non-yellowing, UV-resistant, anti-spall, wear-resistant
- This “cure and seal” style sealer provides the advantage of being able to apply the day after cleaning (no 30 day wait – no worries)
- Highlight all the fine detail and color of the stamp job
- Coverage: approx. 200 sq ft/gallon
TI Tru Grip Sealer Additive
TI Tru Grip Sealer Additive
Tru Impressions Tru Grip is a micronized, polymeric powder added to film forming sealer to improve slip resistance. It will work in both oil-based and water-based sealer products to reduce the danger of slipping on those surfaces. It’s the best method for increasing slip resistance. These fine, rough-shaped pieces of plastic are light enough to remain suspended in the sealer and they are translucent (clear). The particle size in Tru Grip is optimized for maximum slip resistance with minimum effect on the surface.
- Tru Grip is of low-density and has a lightweight composition, which helps eliminate settling in low viscosity (thin) sealers or stains
- Round, spherical shape provides optimum abrasion resistance, gloss control, and is less abrasive when compared to common silica-based texturizing agents
- Typical applications include patios, pool surrounds, sidewalks, porches, walkways, inclines, or garage floors
- Will not yellow or alter the surface color
- One container treats 5 gallons of sealer. You can add two containers for more friction but it will reduce the sheen.
Cure Seal 700 (5 gal)
Cure Seal 700 (5 gal)
Cure Seal 700 is NOT your standard, low-solids, penetrating, curing agent for decorative or plain concrete. It is actively linked to a silicone resin, providing even more benefit than silane/siloxane-type combos. Ideal to use as a base sealer before applying a finish coat 7 days later. Great around pools.
- Improved adhesion and better chemical bonding
- Attractive, low-sheen finish
- Slow drying compared to low-VOC products
- Solvent-based, acrylic resin is non-yellowing, UV-resistant, anti-spall, and wear-resistant
- Coverage: approx 250 sq. ft. per gallon
Tru-Strip Coating Stripper and Remover
Tru-Strip Coating Stripper and Remover
Tru Strip is a roll-on sealer remover that is biodegradable, very user-friendly, easy to use. It is highly effective in removing most standard sealers from surfaces like metal, wood, masonry, brick and especially concrete. Tru Strip provides superior stripping capabilities to lift urethanes, alkyd paints, latex paints, lead based paints and varnish, from all types of substrates. Because Tru Strip emulsifies the material, once broken down, the coatings cannot re-cure.
- Bio-friendly, industrial strength coating stripper
- Safely breaks down most existing coatings including acrylics, urethanes, glues, and some epoxies
- Spray or roll on, wait a few hours, and wipe or wash away
- Safe on most any surface
- Also available in 1-gallon container
- Much more effective than a consumer-strength product from a big box store
- Coverage ranges from 100 to 250 sq ft/gallon (depending on coating thickness)
- No chlorinated solvents
- You should follow the instructions for Tru Strip on a test section before trying the entire surface.
- Water cleanup
Tru Matte Universal Matting Agent
Tru Matte Universal Matting Agent
TRU Matte is easy to use, PREMIUM GRADE, concrete sealer additive designed to reduce gloss of both water and solvent-based acrylic sealers. It is simply added and thoroughly mixed with the sealer just before application. It will reduce gloss without changing the other sealer properties including color change, dry time, or coverage rate. The proprietary material used for the product is resistant to settling out, unlike competitive products in the marketplace.
Tru Matte is made to be used in Walttools acrylic sealers such as Stampsheen, Stampsheen 350, Stampsheen H2O, Cure Seal, and Cure Seal 350 for reducing or eliminating gloss..
For semi-gloss/satin look: ONE 16 oz container for 5 gallons of sealer
For full matte look: TWO 16 oz containers for 5 gallons of sealer
Lower solids sealers such as Cure Seal should not need additional material.
If doing less than a full container, the material should be weighed out accordingly for consistency with batches. One gallon should take just under one kitchen cup
If doing multiple coats, a matting agent should be applied to the final coat
It is always recommended to test sealer and matting agent load on a test area of any job before proceeding on the complete job.
Add matting agent to the desired amount of sealer and mix for two minutes with a medium speed using a Jiffy style mixing head. DO NOT HAND STIR MATERIAL AS IT WILL LIKELY NOT BLEND FULLY. Though Tru Matte stays suspended for a long period of time it is always recommended to re-agitate anytime you pour more material from the original container.
Cure Seal 350
Cure Seal 350
Cure Seal 350 is NOT your standard low-solids, penetrating curing agent for decorative or plain concrete. It is actively linked to a silicone resin providing even more benefit than silane/siloxane type combos. Ideal to use as a base sealer before applying a finish coat 7 days later. Great around pools.
- Improved adhesion and better chemical bonding.
- Attractive low-sheen finish.
- Low 350 VOC formula.
- Slow dry compared to competing low VOC products.
- Solvent-based acrylic resin is non-yellowing, UV resistant, anti-spall, and wear resistant.
- Coverage: approx 250 sq. ft. per gallon.
- Call for pallet quantity pricing.
CONCRETE SEALERS AND COATINGS (WATER-BASED SEALERS)
TI Tru Grip Sealer Additive
TI Tru Grip Sealer Additive
Tru Impressions Tru Grip is a micronized, polymeric powder added to film forming sealer to improve slip resistance. It will work in both oil-based and water-based sealer products to reduce the danger of slipping on those surfaces. It’s the best method for increasing slip resistance. These fine, rough-shaped pieces of plastic are light enough to remain suspended in the sealer and they are translucent (clear). The particle size in Tru Grip is optimized for maximum slip resistance with minimum effect on the surface.
- Tru Grip is of low-density and has a lightweight composition, which helps eliminate settling in low viscosity (thin) sealers or stains
- Round, spherical shape provides optimum abrasion resistance, gloss control, and is less abrasive when compared to common silica-based texturizing agents
- Typical applications include patios, pool surrounds, sidewalks, porches, walkways, inclines, or garage floors
- Will not yellow or alter the surface color
- One container treats 5 gallons of sealer. You can add two containers for more friction but it will reduce the sheen.
Heal and Seal D2K
Heal and Seal D2K
Note, this material no longer has the bright white look that it used to. It is just slightly hazy.
Heal and Seal D2K takes trade secret sealer technology and makes it into an uncompromising, “apply-and-forget-it” product. To put it simply, D2K is the very best decorative concrete sealer on the market for its coverage, durability, and ease of use. D2K will provide color enhancement and satin to a glossy finish. The water repellency is phenomenal and will keep all the bad elements like salt and deicers from penetrating the surface of the concrete.
KEY POINTS:
- Two-part system
- Better coverage than acrylics
- Increased durability
- Superior chemical-resistance
- High heat-resistance
- Phenomenal UV-resistance
- Excellent against road salt and related chemicals
- Coverage is approximately 275-300 sq ft/gallon with single coat coverage in many cases.
- Apply with an inexpensive garden sprayer and roller
- Water cleanup
CAS 150 Cure & Seal (5 gal)
CAS 150 Cure & Seal (5 gal)
CAS 150 is a water-based, cure and seal product designed to serve as a concrete curing membrane, concrete sealer, and dust proofer. CAS 150 is a breathable sealer that provides a satin finish to a multitude of interior and exterior concrete, along with masonry surfaces.
CAS 150 is formulated with a high-grade acrylic resin that is non-yellowing and durable. The addition of a modified colloidal silica sets this product apart by providing increased abrasion resistance, reduced surface porosity, and resistance to winter weather chemicals like salt and other de-icing materials. CAS is the most economical Cure and Seal you can buy. It can be applied to green concrete and will provide all the moisture retention properties of traditional ASTM C1315 curing products but without the overloading of inexpensive acrylics required for that rating (which are the cause of many sealer problems). This unique formula provides the most protection of any related sealer in its class.
CAS 150 exhibits a natural, low-sheen appearance and can be applied by sprayer or roller.
- Low VOC, water-based product
- Water cleanup
- Non-yellow
- Easy application
- Dries quickly
- Excellent surface protection from common elements
- 5-gallon pail
*Price break at 36 count pallet
*Also available in drums
Tru Matte Universal Matting Agent
Tru Matte Universal Matting Agent
PRODUCT DESCRIPTION: TRU Matte is easy to use, PREMIUM GRADE, concrete sealer additive designed to reduce gloss of both water and solvent-based acrylic sealers. It is simply added and thoroughly mixed with the sealer just before application. It will reduce gloss without changing the other sealer properties including color change, dry time, or coverage rate. The proprietary material used for the product is resistant to settling out, unlike competitive products in the marketplace.
Tru Matte is made to be used in Walttools acrylic sealers such as Stampsheen, Stampsheen 350, Stampsheen H2O, Cure Seal, and Cure Seal 350 for reducing or eliminating gloss..
For semi-gloss/satin look: ONE 16 oz container for 5 gallons of sealer
For full matte look: TWO 16 oz containers for 5 gallons of sealer
Lower solids sealers such as Cure Seal should not need additional material.
If doing less than a full container, the material should be weighed out accordingly for consistency with batches. One gallon should take just under one kitchen cup
If doing multiple coats, a matting agent should be applied to the final coat
It is always recommended to test sealer and matting agent load on a test area of any job before proceeding on the complete job.
Add matting agent to the desired amount of sealer and mix for two minutes with a medium speed using a Jiffy style mixing head. DO NOT HAND STIR MATERIAL AS IT WILL LIKELY NOT BLEND FULLY. Though Tru Matte stays suspended for a long period of time it is always recommended to re-agitate anytime you pour more material from the original container.
Tru-Block | Multi-Surface Invisible Protectant & Sealer
Tru-Block | Multi-Surface Invisible Protectant & Sealer
Tru-Block is a one-of-a-kind water repellent and sealer that’s designed to provide the most natural surface possible. Its unprecedented, water-based silicone formula will provide the ultimate results in long-term weather protection without the undesired gloss that comes with traditional film-forming sealers. Open, apply, and you are done. Tru-Block is also recoatable, making this an ultra-convenient concrete sealer. This is effective on many porous surfaces but is truly designed for the decorative vertical surface, as it leaves a perfectly natural finish.
- Ultra-low VOC, water-based product
- Water cleanup
- Easy application
- Excellent surface protection from common spills
- Re-coatable
- Also available in 5 gal pails
Tru-Strip Coating Stripper and Remover
Tru-Strip Coating Stripper and Remover
Tru Strip is a roll-on sealer remover that is biodegradable, very user-friendly, easy to use. It is highly effective in removing most standard sealers from surfaces like metal, wood, masonry, brick and especially concrete. Tru Strip provides superior stripping capabilities to lift urethanes, alkyd paints, latex paints, lead based paints and varnish, from all types of substrates. Because Tru Strip emulsifies the material, once broken down, the coatings cannot re-cure.
- Bio-friendly, industrial strength coating stripper
- Safely breaks down most existing coatings including acrylics, urethanes, glues, and some epoxies
- Spray or roll on, wait a few hours, and wipe or wash away
- Safe on most any surface
- Also available in 1-gallon container
- Much more effective than a consumer-strength product from a big box store
- Coverage ranges from 100 to 250 sq ft/gallon (depending on coating thickness)
- No chlorinated solvents
- You should follow the instructions for Tru Strip on a test section before trying the entire surface.
- Water Cleanup
Stampsheen®H2O Decorative Concrete Gloss Sealer
Stampsheen®H2O Decorative Concrete Gloss Sealer
StampsheenH2O is a standard interior/exterior, water-based acrylic sealer. It provides a medium/high gloss designed for use on concrete and pavers, and it’s non-yellowing. This sealer will provide increased resistance to the elements, such as rain, sun, stains, and other pollutants that can compromise the look of your surface.
- StamphseenH2O is your sealer of choice when the solvent is not an option
- V.O.C. compliant, non-yellowing, and medium/high-gloss
- Breather type sealer that provides a flexible and durable film
- 1-gallon coverage approx. 200 sq ft.
- Call for pallet quantity pricing
- Water cleanup
Pro-Tect Concrete Sealer and Guard
Pro-Tect Concrete Sealer and Guard
Pro-Tect is a one-of-a-kind surface protector/sealer designed for quick and easy protection of decorative concrete surfaces, such as countertops and textured floors. It’s the most popular concrete countertop sealer available due to its ease of use and great results. Its unique stain-blocking ability is unsurpassed in a product this easy to use. Open, apply, and you’re done. Pro-tect is also recoatable, making this ultra-convenient for a concrete sealer of this type. Pro-Tect will leave the surface with a low shine for a more natural look than traditional heavy coatings. You can top it off with TI Kounter Shine Polish to give it a richer, higher gloss finish if desired. This type of surface is very easy to maintain.
- Exclusive acrylic-silicone based hybrid
- Ultra-low VOC, water-based product
- Water cleanup
- Easy application
- Excellent surface protection from common spills
- Recoatable
- Mild gloss
- 1 gallon or 5-gallon pails
Ultra Thane 1000
Ultra Thane 1000
Ultra Thane 1000 is a single-component, water-based, aliphatic urethane made for both indoor and outdoor use on concrete, overlayment, and micro toppings. Ultra Thane 1000 is low VOC and designed to be used alone or as a finish coat over epoxy or similar coatings for increased wearability. It displays excellent resistance to water, alkali, acids, UV Light, and stains.
This product will darken the surface slightly with a medium gloss. Ultra Thane 1000 is the premier thin (2 mil) coating for ease and durability. Its quick-dry time allows for fast recoating and returns to use. The high performance of this clear coat provides the durability of a solvent-based system with the ease and safety of a low VOC (under 100g/L) water-based system. Unlike most polyurethanes (that aren’t moisture tolerant), Ultra Thane 1000 has effective properties related to vapor permeability that allows it to be used outdoors.
For interior coatings, this may be one of the easiest, user-friendly sealers on the market. The low VOC rating makes it usable in nearly all states in the United States. Professional installers can generate LEED points. For the DIYer, the low odor level and easy, roll-on application make it an easy choice. It is the best interior concrete sealer available these days.
Ultra Thane 1000 will make a good coating on vertical surfaces because of its properties against graffiti.
At full cure, this is a hard- and long-wearing surface.
TYPICAL USES: Basements, warehouses, foyers, kennels, restaurant floors, stores, concrete countertops, brick hearths, some tile, or almost any surface that needs an abrasion-resistant. low-mil coating.
- 1-gallon coverage is approximately 250 sq ft/gallon
- Can even be tinted for a one step finish such as for a garage or workshop floor
- Best results come from two or three light applications
- Water cleanup
- Dries in an hour or so; usable cure in 24-48 hrs, full cure in 7 days
Tru Pel | Sealer for Concrete, Brick, & Masonry Surfaces
Tru Pel | Sealer for Concrete, Brick, & Masonry Surfaces
Tru Pel is a concentrated, water-based, low VOC, high-performance, penetrating, silane/siloxane water repellant and sealer designed for dense concrete, brick, and other masonry surfaces. Also EXCELLENT for waterproofing and protecting plain concrete such as sidewalks and driveways. It performs as well as its solvent-based, less earth-friendly counterparts.
As it penetrates the surface it reacts with minerals within the substrate and creates a hydrophobic barrier against water intrusion at the surface level. Its unique formula repels water while being highly permeable to water vapor. This is a no-sheen product so it works well for the environmental protection of decorative vertical concrete.
This is an excellent primer to use on concrete before using a decorative solvent based acrylic sealer. It prevents water intrusion even when the topical sealers break down over time give long lasting protection.
Concentrated gallon product makes 5 to 10 gallons. Or use at 2-1 dilution for a great graffiti barrier.
- Easy to apply with an inexpensive sprayer or hand applicator
- Excellent long-term wear capabilities
- Breathable coating
- Environmentally friendly
- Water cleanup
- Recoatable
- Ultra-low VOC < 100
- Non-slick
- 1-gallon concentrate makes 5 gallons
- 5-gallon makes 25 gallon
Polish
Shield
Polish Shield
Polish Shield (formerly known as Floorshield Guard) is a water-based, penetrating, color guard and polished floor protector to be used on polished and densified concrete surfaces. It is not a topical wax, but a unique surface treatment used to help reduce soiling stains from setting into your polished floors. The ultra-low VOC formula contains a blend of colloidal silica to further harden your floor while applying an even layer of an ultra-thin resinous coating for protection. Apply with a microfiber applicator and it can be burnished when dry to a high shine. Excellent for using with SLP overlayment.
- No odor
- Fast drying
- Color enhancement
- Easy to apply
- Excellent for polished concrete countertops or floors
- 1 gal
CAS 150 Cure & Seal (1 gal)
CAS 150 Cure & Seal (1 gal)
CAS 150 is a water-based, cure and seal product designed to serve as a concrete curing membrane, concrete sealer, and dust proofer. CAS 150 is a breathable sealer that provides a satin finish to a multitude of interior and exterior concrete, along with masonry surfaces. CAS 150 is formulated with a high-grade acrylic resin that is non-yellowing and durable. The addition of a modified colloidal silica sets this product apart by providing increased abrasion resistance, reduced surface porosity, and resistance to winter weather chemicals like salt and other de-icing materials. CAS is the most economical Cure and Seal you can buy.
It can be applied to green concrete and will provide all the moisture retention properties of traditional ASTM C1315 curing products but without the overloading of inexpensive acrylics required for that rating (which are the cause of many sealer problems). This unique formula provides the most protection of any related sealer in its class.
CAS 150 exhibits a natural, low-sheen appearance and can be applied by sprayer or roller.
- Low VOC, water-based product
- Water cleanup
- Non-yellow
- Easy application
- Dries quickly
- Excellent surface protection from common elements
- 1-gallon bottle
PTI Epoxy 1040 (2 GAL Kit)
TI Epoxy 1040 (2 GAL Kit)
- Easy-to-use, water-based epoxy system for floors and countertops
- This 2 part (1:1) epoxy may be used as a medium gloss finish or as a primer coat for any number of other desired coatings such as PAP systems and urethanes
- Excellent chemical resistance
- Long pot life
- Very forgiving to apply
- Durable finish
- Low odor
- 2-gallon kit
- Coverage will vary from surface to surface
Floor Shine
Polish
Floor Shine Polish
TI Floor Shine Polish is an economical, buffable coating for previously sealed surfaces.
- This easy-to-use acrylic/wax hybrid will provide durable protection for the underlying sealer
- Fast-drying
- Easy build
- Water cleanup
- Safe to use
- One gallon coverage approximately 300-400 sq ft.
Sheepskin Coating Applicator
Sheepskin Coating Applicator
100% natural sheepskin applicator block is perfect for applying various sealers and coatings.
- Great for water-based or solvent-based products
- Great for polyaspartics on countertops
- Smoothly apply floor waxes
- Block accepts standard broom handles (handle NOT included)
- Covering is replaceable
- 2 lbs
- #24-290
Densifiers
Colloidal Tru Hard Densifier
Colloidal Tru Hard Densifier
Colloidal Tru Hard Densifier is your go to densifier and concrete treatment for bringing out the best results in your polished concrete or polished overlayment. It is sold as a potent concentrate that you add to 4 to 8 parts potable water to make ready to use material. Colloidal Tru Hard Densifier is a state-of-the-art concrete hardener and densifier made up of nano silica particles and other chemical and mineral enhancers used to prevent dusting and increases durability of concrete slab floors.
Colloidal Tru Hard is designed to be used in the process of concrete polishing to seal, increase sheen, reflectivity, and beautify concrete floors. It works by reacting with concrete deep throughout the slab, blocking up the capillaries to prevent water transmission by forming a permanent insoluble gel barrier, and reacts with unused cement to form more concrete on a micro scale. It will also perform extraordinarily with concrete slabs that are decades old.
- Prevent concrete dusting
- Shown in studies to reduce or eliminate radon
- Permanently fills porous capillaries of concrete to create a permanent bond that makes concrete harder and less porous
- Concentrated for best value
- Meets all VOC regulations
- Low viscosity and smaller molecular size provides deeper and more complete penetration
- Will not discolor, blush, or peel over time
- Reduces operating costs through increased ease of maintenance and cleaning
- Significantly reduces water permeability
Polish Shield
Polish Shield
Polish Shield (formerly known as Floorshield Guard) is a water-based, penetrating, color guard and polished floor protector to be used on polished and densified concrete surfaces. It is not a topical wax, but a unique surface treatment used to help reduce soiling stains from setting into your polished floors. The ultra-low VOC formula contains a blend of colloidal silica to further harden your floor while applying an even layer of an ultra-thin resinous coating for protection. Apply with a microfiber applicator and it can be burnished when dry to a high shine. Excellent for using with SLP overlayment.
- No odor
- Fast drying
- Color enhancement
- Easy to apply
- Excellent for polished concrete countertops or floors
- 1 gal
Sodium Tru Hard Densifier
Sodium Tru Hard Densifier
# 1 choice warehouse sealer
Sodium Tru Hard Densifier is a protective concrete treatment formulated to chemically react with the lime in concrete to form an insoluble silica gel. Tru Hard fills the pores of the concrete just below the surface and deeply into the concrete, and provides a positive seal that resists deicing chemicals, water, grease, and oil. It prevents “dusting” of new and old concrete floors, and it will seal the concrete to significantly reduce the level of radon gas penetration which is known to cause lung cancer by the EPA.
Tru Hard Sodium is a permanent, silicate-based, deep-penetrating sealer which means that it will last for the life of your concrete because it chemically bonds to the concrete to become part of its integral structure.
Our formula is highly effective in making concrete physically stronger and denser, protecting it against frost and salt while increasing its resistance to stains, acids, alkalis, moisture, mold, and mildew.
This treatment will cure damp basements by preventing hydrostatic water from penetrating through the concrete.
Tru Hard Sodium is also used as an economical polishing aid in floor and concrete countertop diamond polishing. It is generally used on interior or exterior concrete for all-in-one sealing and dust-proofing on warehouse floors, food storage areas, educational facilities, and medical facilities.
NOTE: Not recommended to use with Acid Stains.
WAREHOUSE CONCRETE SEALERS
CAS 150 Cure & Seal (5 gal)
CAS 150 Cure & Seal (5 gal)
CAS 150 is a water-based, cure and seal product designed to serve as a concrete curing membrane, concrete sealer, and dust proofer. CAS 150 is a breathable sealer that provides a satin finish to a multitude of interior and exterior concrete, along with masonry surfaces. CAS 150 is formulated with a high-grade acrylic resin that is non-yellowing and durable.
The addition of a modified colloidal silica sets this product apart by providing increased abrasion resistance, reduced surface porosity, and resistance to winter weather chemicals like salt and other de-icing materials. CAS is the most economical Cure and Seal you can buy.
It can be applied to green concrete and will provide all the moisture retention properties of traditional ASTM C1315 curing products but without the overloading of inexpensive acrylics required for that rating (which are the cause of many sealer problems). This unique formula provides the most protection of any related sealer in its class.
CAS 150 exhibits a natural, low-sheen appearance and can be applied by sprayer or roller.
- Low VOC, water-based product
- Water cleanup
- Non-yellow
- Easy application
- Dries quickly
- Excellent surface protection from common elements
- 5-gallon pail
*Price break at 36 count pallet
*Also available in drums
Colloidal Tru Hard Densifier
Colloidal Tru Hard Densifier
Colloidal Tru Hard Densifier is your go to densifier and concrete treatment for bringing out the best results in your polished concrete or polished overlayment. It is sold as a potent concentrate that you add to 4 to 8 parts potable water to make ready to use material. Colloidal Tru Hard Densifier is a state-of-the-art concrete hardener and densifier made up of nano silica particles and other chemical and mineral enhancers used to prevent dusting and increases durability of concrete slab floors.
Colloidal Tru Hard is designed to be used in the process of concrete polishing to seal, increase sheen, reflectivity, and beautify concrete floors. It works by reacting with concrete deep throughout the slab, blocking up the capillaries to prevent water transmission by forming a permanent insoluble gel barrier, and reacts with unused cement to form more concrete on a micro scale. It will also perform extraordinarily with concrete slabs that are decades old.
- Prevent concrete dusting
- Shown in studies to reduce or eliminate radon
- Permanently fills porous capillaries of concrete to create a permanent bond that makes concrete harder and less porous
- Concentrated for best value
- Meets all VOC regulations
- Low viscosity and smaller molecular size provides deeper and more complete penetration
- Will not discolor, blush, or peel over time
- Reduces operating costs through increased ease of maintenance and cleaning
- Significantly reduces water permeability
CAS 150 Cure & Seal
CAS 150 Cure & Seal
CAS 150 is a water-based, cure and seal product designed to serve as a concrete curing membrane, concrete sealer, and dust proofer. CAS 150 is a breathable sealer that provides a satin finish to a multitude of interior and exterior concrete, along with masonry surfaces. CAS 150 is formulated with a high-grade acrylic resin that is non-yellowing and durable. The addition of a modified colloidal silica sets this product apart by providing increased abrasion resistance, reduced surface porosity, and resistance to winter weather chemicals like salt and other de-icing materials. CAS is the most economical Cure and Seal you can buy.
It can be applied to green concrete and will provide all the moisture retention properties of traditional ASTM C1315 curing products but without the overloading of inexpensive acrylics required for that rating (which are the cause of many sealer problems). This unique formula provides the most protection of any related sealer in its class.
CAS 150 exhibits a natural, low-sheen appearance and can be applied by sprayer or roller.
- Low VOC, water-based product
- Water cleanup
- Non-yellow
- Easy application
- Dries quickly
- Excellent surface protection from common elements
- 1-gallon bottle
Sodium Tru Hard Densifier
Sodium Tru Hard Densifier
# 1 choice warehouse sealer
Sodium Tru Hard Densifier is a protective concrete treatment formulated to chemically react with the lime in concrete to form an insoluble silica gel. Tru Hard fills the pores of the concrete just below the surface and deeply into the concrete, and provides a positive seal that resists deicing chemicals, water, grease, and oil.
It prevents “dusting” of new and old concrete floors, and it will seal the concrete to significantly reduce the level of radon gas penetration which is known to cause lung cancer by the EPA. Tru Hard Sodium is a permanent, silicate-based, deep-penetrating sealer which means that it will last for the life of your concrete because it chemically bonds to the concrete to become part of its integral structure.
Our formula is highly effective in making concrete physically stronger and denser, protecting it against frost and salt while increasing its resistance to stains, acids, alkalis, moisture, mold, and mildew.
This treatment will cure damp basements by preventing hydrostatic water from penetrating through the concrete.
Tru Hard Sodium is also used as an economical polishing aid in floor and concrete countertop diamond polishing. It is generally used on interior or exterior concrete for all-in-one sealing and dust-proofing on warehouse floors, food storage areas, educational facilities, and medical facilities.
NOTE: Not recommended to use with Acid Stains.
Sodium Tru Hard (Hard Top) QT
Sodium Tru Hard (Hard Top) QT
- Sodium silicate densifier penetrates deeply and produces a very resilient countertop surface
- Densified surfaces reduce stain penetration
- Fast application
- Increased scratch resistance
- Allows “natural” look
- Totally food safe
- Indoors and out
- Coverage of 200 sq ft
It can be applied to green concrete and will provide all the moisture retention properties of traditional ASTM C1315 curing products but without the overloading of inexpensive acrylics required for that rating (which are the cause of many sealer problems). This unique formula provides the most protection of any related sealer in its class.
CAS 150 exhibits a natural, low-sheen appearance and can be applied by sprayer or roller.
- Low VOC, water-based product
- Water cleanup
- Non-yellow
- Easy application
- Dries quickly
- Excellent surface protection from common elements
- 1-gallon bottle
What Our Customers Say About Our Services
Transform Your Space with Our Decorative Concrete Solutions
Discover the endless possibilities of decorative concrete with Decorative Concrete & Supply. Our commitment to quality and innovation ensures your projects are not only stunning but also durable. Let us help you create an inspiring environment that lasts.
WHY CHOOSE US?
"*" indicates required fields